Rodecaster Pro Audio Interface Settings

Here are some steps to help you set up a Rodecaster Pro for use with SquadCast:

  1. Ensure your Rodecaster Pro device’s firmware is fully up to date.
  2. Plug your Microphone into Channel 1 with the XLR cable.
  3. Plug your Headphones into the Headphone port.
  4. Power on the Microphone.
  5. Plug your Rodecaster Pro device into your computer with the USB cable.
  6. Power on the Rodecaster Pro device.
  7. On your Rodecaster Pro device, click the Settings button in the upper left of the main screen.
  8. Click Advanced.
  9. Click Audio.
  10. Click Processing.
  11. Toggle on the switch labeled Enable Mix-Minus.
  12. Select the Rodecaster Pro (Stereo) device as your Operating System default device for Microphone and Headphones.
  13. Join your session on SquadCast and select your Rodecaster Pro (Stereo) device as the Microphone (input) and Headphones (output).

For additional information on the Rodecaster Pro, please see the product User Guide

Was this page helpful?
0 out of 0 found this helpful