Zoom Audio Interface Settings

Here are some steps to help you set up Zoom Audio for use with SquadCast:

  1. Plug your Microphone into Channel 1 with the XLR cable.
  2. Plug your Headphones into the Headphone port.
  3. Power on the Microphone.
  4. Plug your Zoom device into your computer with the USB cable.
  5. Power on the Zoom device.
  6. On your Zoom device click the Menu button located on the side.
  7. Use the scroll switch to select USB and then press the scroll switch to select it.
  8. Use the scroll switch to select Audio Interface and then press the scroll switch to select it.
  9. Use the scroll switch to select Stereo Mix and then press the scroll switch to select it.
  10. Select the Zoom device as your Operating System default device for Microphone and Headphones.
  11. Join your session on SquadCast and select your Zoom device as the Microphone (input) and Headphones (output).
Enable Mix-Minus

Be sure to enable Mix-Minus in your interface settings to ensure unnecessary echo or feedback is not created.

For additional information on the Zoom audio interface, please see the product manual.

Was this page helpful?
0 out of 0 found this helpful